Flexi Hose and Isolating Valve

flexi-hose-and-isolating-valve-1376431434-jpg

6.95

In stock

15mm Flexi Hose and Isolating Valve

When installing an Instant Hot Water Tap or a Bathroom Instant Hot Water Tap it is recommended to use a 15mm Flexi Hose with an Isolating Valve.

This is used to connect the bottom of the tap with the cold water supply pipe.

How to Connect Flexi Hose and Isolating Valve installing-flexi-hose-and-isolating-valve

1: Turn off both cold and hot water supplies.

2: Detach water supplies from the old tap you are replacing

3: Connect flexi hose and isolating valve to the cold water supply pipe.

4: Install Instant Hot Water Tap and connect the bottom of the tap with to the flexi hose and isolating valve under the sink

5: Set water pressure on isolating with the screw reading at about 10 minutes before 4 o' clock (see image above)

The Flexi Hose and Valve is a WRAS Approved product. It measures 300mm in length. The hose is 15mm in width with a 1/2 valve fitting.

Please Note: if ordering an Instant Hot Water Tap you may also require a  Blank Brass Cap  and a Three pin plug in order to complete the installation process.

Adding all three products to your order now will add only €7.90 to the overall price.

All three products can be ordered together at Electric Hot Water Tap Installation Kit

This can also ensure that you can install the new tap immediately when you receive it and you won't incur a second delivery charge if you need to come back to order any of these items.

winner_h

blank-brass-cap-12-inch-1376427353-jpg

Blank Brass Cap 1/2 Inch

3.95

instant-hot-water-tap-1-jpg

Instant Hot Water Tap

149.95