Frost Watcher Heater

Energy Saving Frost Watcher Heater 

This Frost Watcher uses just 450W of energy when in use (costs about 12 cent per hour to run)

When in use it effectively protect pipes against frost damage during cold weather.

Suitable for indoor or outdoor use the Frost Watcher is ideal for use in an attic or loft but also great in greenhouses, garages, workshops, caravans and animal housing.

Easy to use with simple controls the heater is housed in a powder coated metal case.

Impressively it has direct thermostat regulation for constant temperatures between 0-20 degrees Celsius.

This Frost Watcher 450W can be wall mounted is compact and operates through convector heat.

A CE/GS approved product, the Frost Watcher is IP23 rated and comes with a 1.6m power lead.

Power: 400W-450W/50Hz/220-240V

Installing Frost Watcher

1: Remove wall mounting bracket from the appliance.

2: Use bracket as a template to drill holes and use screws and wall plugs supplied.

3: Ensure appliance is level and vertical when reattached to the bracket

4: Do not overtighten the bracket screws when locking the appliance in place.

5: Insert plug in socket and turn thermostat knob fully in a clockwise direction to the maximum setting.

6: When the desired room temperature has been reached the thermostat should be turned slowly anti-clockwise until the thermostat is heard clicking off and the light on the element switches are seen to go out. After this the heater will keep the air temperature in the room at that set temperature by switching on and off automatically as needed.

Please not by setting the rotary knob at the second dot after the snow flake symbol the frost watcher will automatically turn on at 2 degrees celsius and protect against frost.