Solar PIR Security Light


No longer available

Solar PIR Security Light

This Solar outdoor light with PIR detector will provide you with mains free outdoor sensor lighting.

This complete solar kit includes everything to light up to a range of 9 meters and requires no maintenance and has no running cost.

Fitted with 80 super bright LED lights the Norko SL80 is the perfect mains free solution for professional outdoor security lighting.

Easy to fit the Norko comes in two parts. The Solar panel and the light.

The solar panel which can be placed a long distance from the light as it comes with a 4.5 meter cable so you could place the solar panel on a south facing wall for maximum charging and the light around the corner if required. It charges during the day through the included rechargeable batteries.

The main light itself has a 180 degree sensor and 3 adjustment wheels to get the best detection.

There is three light setting on, off or auto. This allows for the light to be on at all times after dark, off at all times or set so it will only come on for a short time when it detects movement within its range.

The 80 LED's provide an impressive 900 Lumen light output and the product  is completely weatherproof and splashproof with an IP rating of 44.

Ideal for gardens, outhouses, garages, sheds and anywhere you require a light at night to help protect your property.

Norko SL80 Solar PIR Security Light Specifications

  • 80 LED's with a light output of 900 Lumens
  • Built in replaceable rechargeable batteries
  • Weather Resistant and Splashproof (IP44)
  • 180 Degree detection range
  • Seperate Solar Panel with 4.5 Metre Cable
  • Mounting brackets and screws included in kit

Installing the Solar PIR Security Light and Solar Panel

1: Ensure to have a screwdriver, pencil and a power drill on hand.

2: Place the U-shaped mounting bracket on the surface you wish to mount to.

3: Mark with a pencil the position of the U-shaped mounting bracket screw holes which allows you to pre-drill your screw holes.

4: One the U-shaped mounting bracket is installed ensure all screws are tight. You are now ready to position your 80 LED Solar Motion Light in place.

5: When deciding where to place your solar panel try to position it where it receives direct sunlight (ideally south facing) and where it is generally free from cover and shade.

6: The panel comes with a custom pre-installed mounting bracket which allows for seasonal adjustments and angle variation. Utilize the pre-drilled screw holes to attach panel to your chosen surface.

Setting Up and Using Solar PIR Security Light 

Before the solar motion light can operate to its full capacity the solar panel should be in sunlight for 3 days to fully charge the included battery. Charging should be done with the unit in the Off position.

Turn the switch to Auto position, the light will turn on automatically at night when motion is detected by the Motion Dector head.

Turn the switch to On position and the light can be used as a standard light for constant illumination.

The light has 3 different control dials which control the lights duration, sensitivity to light and sensitivity to motion.

Lux Dial

The Lux dial tells the sensor the level of darkness that must be reached before the light will turn on.

If set to moon the sensor will only trigger the light to turn on at dusk or when it is dark out. This is the ideal position for general usage.

If set to sun the light will go on in daylight. Thi s can allow you to adjust operation in low light periods as opposed to complete darkness.

Time Dial

The time adjusting dial sets the duration of the illumination time

Sens Dial

For normal setting place in mid position and to maximise range place in max position.



Solar Shed Light

Currently Out of Stock


Solar Flashlight

Product no longer available