Far-Infrared Heating Plates

far-infrared-heating-panels-2-jpg

Select

In stock

Far-Infrared Heating Panels

Currently out of stock due until January due to manufacturing materials shortfall.

We have other great Far Infrared Heat Options Here

These brilliant plug in ready to use Far Infrared Heating Panels are made in Ireland in County Cavan.  Designed to replace you existing central heating system these Pureheat panels have been designed as a highly efficient way for heating spacious rooms in domestic
and commercial environments.

The ultra-lightweight panels are only 25mm thin and can be easily mounted on the internal ceiling or high on walls to provide a warm radiant heat throughout the room.
No electrician is required to install as they are supplied on a plug but you can opt to have them wired in if you wish and controlled with our wireless 7 day programmable room thermostat.

These panels are highly energy efficient and costs just 8 cents an hour to run, saving literally hundreds of euros a year in heating bills when compared to traditional systems like oil-fired central heating.

Tip on Using Far Infrared Heating Panels

It is nice to be able to walk into a warm and cosy home when you come home from work. So regulating the time your Far Infrared panels turn on and switch off is a must for many people.

If using as plug in heaters in order to ensure maximum energy saving and comfort it is advisable to use either plug in timers or plug in thermostats  in conjunction  with your panels.

Designed on the same principle as that of the sun radiating the earth, Far-Infrared Heating plates are a revolutionary energy efficient way to heat your home or office whilst avoiding the unhealthy air of other heating systems.

The panels are fitted to your ceiling and deliver heat to every corner of your room unlike other heating systems which are dependent on air circulation or heat conduction.

 How to Decide Which Far Infrared Heating Panel you Require?

500W Panel 1000W Panel 1500W Panel
Size 545mm x 545mm 1195mm x 545mm 1635mm x 545mm
Width 25mm 25mm 25mm
Element Type Etched Foil Etched Foil Etched Foil
Line Voltage 220/240V 220/240V 220/240V
Servicable Area / Volume 8m2 / 20m3) 17m2 / 42(m3) 28m2 / 70m3)
Max Surface Temperature 120°c 120°c 120°c
Average Surface Temperature 112°c 112°c 112°c
Life Span 25 Years 25 Years 25 Years
Efficiency >98% >98% >98%
Cost of running per hour 8 cent * 19 cent * 25 cent *

*The above costs are based on information provided by SEAI in relation to domestic consumption delivered rate of 16.59cent per KW

  • All panels are suitable to be installed on ceilings up to 2.5 meters in height for maximum efficiency
  • All panels can be mounted vertically or horizontally on walls or ceilings.
  • All panels come with a 5 year manufacturers warranty.

 

Features and Benefits of Far Infrared Heating

1. Instant Heat

Infrared Heat Panels provide optimum heating temperature after 3 Minutes. Instead of far-infrared-panel-installedwarming the air like other conventional heaters, Infrared Heat Panels heat objects directly in their paths. Heating the air wastes energy and the benefits of the heat aren’t felt immediately. The rays produced by Infrared Heat Panels penetrate and warm you beneath the skin.
The Infrared rays radiate outward, heating all nearby objects, producing a widespread effect. This all happens within 3 Minutes, with no need to wait for the heat to buildup.

2. Cost Effective
The benefit of any space heater is zone heating. With an Infrared heater, heating only the parts of your home that you’re using at any given time is possible. When you aren’t heating your entire home, you’ll save money on your heating bill. Infrared Heat Panels can save you up to 30-70% on heating costs. Actual savings vary depending on insulation, ceiling height, type of construction and other factors.

3. Minimal Maintenance
Nobody wants to be burdened with a bunch of maintenance tasks. Because Infrared Heat

Panels have no moving parts, maintenance is almost non-existent. There are no motors to wear out, air filters to replace or boilers to maintain.

4. Fully customisable heating system 
Integrate with your home heating system. Create Zones in Your home for ultimate control. Ability to utilise with Thermostats, timers and PIR sensors

5. Infrared Heat Panels are inaudable
When in noise-sensitive environments such as bedrooms or studies, finding a heater that doesn’t operate loudly is important. There are no moving parts or fan blades whirring on Infrared Heat Panels, therefore they deliver heat silently.

6. Comfortable, Gentle Heat

Infrared Heat Panels can make you comfortable indoors no matter what the temperature is outdoors. Also, Infrared Heat Panels aren’t affected by drafts or wind.

7. Environmentally Friendly

This day in age, the earth’s resources must be used responsibly. Infrared Heat Panels operate without any carbon combustion, no toxic by-products of combustions, no open flame, and no fuel lines to leak. They add nothing to the air and take nothing away from the air, making them environmentally friendly.

8. Energy Efficient

Infrared Heat Panels use a substantially lower amount of energy than conventional heaters. Some Infrared Heat Panels can operate on as low as 300 watts of electricity and 800 watts is enough power to provide heating to a room. Also, there’s no need to turn on the heater in advance to pre-heat the room because heat is delivered instantly.

9. No Dry Heat

Unlike conventional heaters that draw moisture out of the air as a part of their heating process, Infrared Heat Panels don’t produce dry heat. This way you can avoid uncomfortable side effects such as itchy eyes and throat.

How Do Far Infrared Heating Panels Work?

Just as the rays from the sun travel great distances through the cold of space to heat our world infrared radiant heat panels unlock the heat in our environment.

Traditional heating systems cannot compete with the massive savings infrared heat panels how-far-infrared-heating-workscan give (Up to 70%) and are remarkably inefficient, burning vast quantities of fossil fuels to simply heat the air in the room. This air then rises above our heads and gathers at the ceiling.

The heat in the air is slowly released to atmosphere through ceilings, doors and windows.

Infrared Heating systems give incredible savings because they don’t work in this grossly inefficient and antiquated way.

Traditional heating drys out our environment and the loss of heat through the cooling of the air in the room means a requirement for constant burning of fuel to maintain the comfort of those occupying the room.

As always, nature has a more efficient way of doing things. Infrared Radiant Heat Panels mimic the way in which the Sun heats our environment.

Using harmless, clean, healthy and incredibly economical electromagnetic waves, that lie just under the visible range of light; Infrared Radiant Heat Panels cleanly and greenly bring us instant, controllable heat at a fraction of the cost of traditional, inefficient and dirty fossil fuel based heating systems.

The electromagnetic waves cause molecules to oscillate and release energy within the environment to be heated. It is this effect that makes us feel warm.

Customer Reviews

"Got the far infrared panel up and it is working great.  A fantastic investment and the heat is superb, works perfectly with the plug in thermostat and controls on and off as needed.  I have attached some pics for you, could be investing in another one soon"

Mark, Co Leitrim

Relevant Links on Far Infared Heating Plates

How the Far- Infrared Heating Plates actually Work

Saving with Far-Infrared Heating Plates compared to traditional heating systems.

winner_h

On Sale!

eco-panel-heater-new-jpg

Eco Panel Heater

Click Image or Product Title (Above) for Price Options

timeguard-wireless-thermostat-jpg

Wireless Room Thermostat

89.95

21 Comments

  1. Pingback: Eco Kitchen Tips
  2. Got these heating panels installed throughout the house, and now using them as our only heating system, replacing our oil system. We’re really pleased with them, particularly how controllable they are – each room being individually controlled is great, as with the switch for our oil system being outside in the garage, I often forgot to go turn it off if we were going out. The other great thing with these is the way they will switch themselves off once the room reaches the set temperature – so, for example, in the kitchen if I have the oven on, the heater will automatically turn itself off, so you aren’t wasting energy (and money!).

    1. Can you please specify a link to the product you are referring to. If you are on about Ceramic Eco Panel heaters the answer is no. If you are on about Far Infrared Heating Plates (where you asked this question) the answer is yes.
      It all comes down to the IP rating of a heater.

  3. Hello, I’m renovating a Georgian property and thinking of using IR in the basement which will become the kitchen. It has exposed stone walls. Do you have experience with those panels in Georgian houses? Does it make a difference if the walls are stone or brick? Do they have to be in the ceiling? Can I talk to someone about doing the whole house in IR and what I would need? Thanks,
    Samira

  4. Have a man shed (well insulated) which is 3Mtrs X 4Mtrs. What size of heater would I need for this. Currently using a fan heater on the floor, so how better would these be?John

Leave a Reply

Your email address will not be published.